What is Extra View?

Extra View is an economical and convenient way of watching different channels on different decoders under one DStv subscription. So, instead of having multiple DStv subscriptions for each decoder, you can link the decoders under one DStv subscription.

To put it in simple terms, let’s assume that we have family members who may want to watch different TV channels at the same time. This can cause family members to squabble over the remote control. So, extra view solves this problem by allowing each family member to watch a different channel.

To add to that, you and your family can record different shows on separate decoders. When using Extra view, you can watch up to 3 live TV channels at the same time.

Introduction

Welcome to our comprehensive guide on setting up DStv Extra View. With Extra View, you can enjoy multiple DStv channels on different TVs in your home while only paying one subscription fee. Follow our step-by-step instructions to make the setup process smooth and hassle-free.

Step 1: Gather Necessary Equipment

Before you begin, make sure you have the following equipment ready:

  • Two DStv decoders (Primary and Secondary)
  • Smart LNB (if you don’t have one, consider upgrading for better performance)
  • DStv subscription with the Extra View option activated
  • Coaxial cables
  • HDMI or RCA cables
  • Remote controls for both decoders

What is the 2023 DStv extra view price?

In order to use DStv extra view, you have to pay your regular DStv subscription fee plus a monthly access fee of R105 per month for each extra decoder in the setup.

084 094 4386

Step 2: Smart LNB Installation

If you haven’t installed a Smart LNB yet, follow these steps:

  1. Locate the Dish: Identify the satellite dish on your property.
  2. Disconnect Old LNB: If there’s an old LNB, disconnect it from the satellite dish.
  3. Install Smart LNB: Connect the Smart LNB to the dish, ensuring it’s securely attached.
  4. Connect Cables: Connect the coaxial cables to the Smart LNB.

Step 3: Connect the Primary Decoder

  1. Positioning: Connect the primary decoder to the main TV in your home using HDMI or RCA cables.
  2. Smart LNB Connection: Connect the primary decoder to the Smart LNB using a coaxial cable.
  3. Power Up: Plug in the power cable and turn on the primary decoder.

Step 3: Connect the Primary Decoder

  1. Positioning: Connect the primary decoder to the main TV in your home using HDMI or RCA cables.
  2. Smart LNB Connection: Connect the primary decoder to the Smart LNB using a coaxial cable.
  3. Power Up: Plug in the power cable and turn on the primary decoder.

Step 5: Connect the Secondary Decoder

  1. Positioning: Connect the secondary decoder to the additional TV using HDMI or RCA cables.
  2. Smart LNB Connection: Connect the secondary decoder to the Smart LNB using a separate coaxial cable.
  3. Power Up: Plug in the power cable and turn on the secondary decoder.

Step 6: Pair the Decoders

  1. Remote Control Configuration: Use the primary decoder’s remote control to access the settings menu.
  2. Enable Heartbeat Connection: Enable the Heartbeat connection in the settings menu.
  3. Repeat for Secondary Decoder: Repeat the process on the secondary decoder.

Step 7: Test the Setup

  1. Check Signal Strength: Ensure both decoders have a strong signal strength.
  2. Verify Channels: Confirm that both decoders can access DStv channels simultaneously.
  3. Test Remote Control Functions: Test the remote controls to ensure they control the correct decoders.

Congratulations! You’ve successfully set up DStv Extra View, providing you with a seamless multi-room entertainment experience. If you encounter any issues during the setup process, refer to the DStv user manual or contact Smart Satellite Dstv Installers care for assistance. Enjoy your expanded viewing options!

Call Us
WhatsApp Us
Contact Us